Convert a Wireless Router into an Access Point.

1. Take a network cable and plug into LAN port #2 of your wireless router and the other end into your PC.
2. Reboot your PC to get a new address from the wireless router.
3. Then start your browser and type the default IP address of your wireless router(http://192.168.1.1 - Login ID = admin , and a Password = admin  for Linksys).
4. Set Encapsulation to bridge mode and set the local IP address to an unused address on your current network(192.168.0.253).
5. Set the "DHCP" Server to "Disable".
6. Save the settings.
7. Connect the cable from your existing network into the LAN Port #1 of your wireless router, and reboot your PC.
8. Log into your new wireless access point with your wireless laptop.